| Customization: | Available |
|---|---|
| Type: | Racks & Enclosure |
| Material: | PP |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Standard Accessories
Tag paper:1pcs
Sand paper :1pcs
Silver paper :1pcs
Sealing rubber strip : 1pcs
Insulating tape : 1pcs
Cable tie:3mm*10mm 8pcs
Fiber protective tube : 2 pcs
Heat-shrink sleeve:1.0mm* 3mm*60mm 48pcs
Pole accessories:1 pcs ( Optional Accessories )
Dimensions and Capability
| Dimensions (D*H) | 300mm*120mm |
| Max Capacity | 48Cores |
| NumberofCableEntrance/Exit | 1:3 or 2:2 |
| DiameterofCable | 4 small round ports(16mm) |
| Temperature | -40~+60 |
| Humidity | ≤95% (at 40) |
| Air Pressure | 70kPa ~106kPa |
Technical Specifications
1.Seal performance: after the box is sealed, inflate to 100kPa inwards (inflation only apply to the models with the air hole), and then soak it in the water of normal temperature, after 15 minutes of steady observation, there is no bubble to overflow.
2.Insulation resistance: the insulation resistance between the metal work piece and the earth is greater than 20kMQ.
3.Pressurization: there is no breakdown or flashover under 15kVdc/1min between the metal work piece and the earth.
4.The curvature radius of the fiber 40mm, without extra loss inside the splice tray.
5.It can bear the axial tensile strength no less than 1000N.
6.Lifetime: 25 years.
7.Other performances are all in accordance with the requirement of standard YD/T814-1998.
){kind=link}