| Customization: | Available |
|---|---|
| Transmission Medium: | Single-Mode |
| Structure: | SC |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Fiber Optic Fast Connector Sc Apc Sc Upc Ftth Fibra Optica Quick Connector Assembly Connector
Description
The fast connectors or field assembly optical connector are pre-polished from factory with V groove
mechanical splicing principal to be terminated without epoxy. It operates simply without any additional
practices or adhesives for field installation.
We provide LC, SC, FC singlemode, multimode fiber optic fast connector which is widely used in optical
wiring, CCTV, FTTH projects.
Features:
♦ Field installable in short time
♦ Factory pre-installed fiber stub
♦ No epoxy and polish required and without special tools to be used
♦ Eliminates cable excess length and pigtail splice storage
♦ Reliable and superior optical performance
♦ UPC or APC endface polish, singlemode or multimode for option
Application
♦ FTTH access network.
♦ Telecommunication Networks
♦ CATV Networks .
♦ Local Area Networks
♦ Optical repair or replacement requirement
♦ Maintenance or emergency restoration of fiber networks
Optical Characteristics
| Category | Specification | |
| Applicable for | Drop cable, Indoor cable | |
| ptical fiber diameter and fiber | 125um(G657A1&G657A2&G657B) | |
| Tight buffer Diameter | 250um | |
| Fiber mode | Single mode or Multi mode | |
| peration time | Sec | About 50(no fiber cut) |
| Insertion Loss | dB | ≤0.3(max 0.5) |
| lnsertion Loss Typical value | dB | 0.3 |
| Return Loss | dB | ≥45 |
| Fastening strength of naked fiber | N | ≥5 |
| Tensile strength | N | ≥50 |
| Reusable | Time | ≥10 times |
| perating Temperature | -40~+85 | |
| on-line tensile strength(2ON) | dB | ΔIL≤0.3 |
| Mechanical durability(500 times) | dB | ΔIL≤0.3 |
| Drop-off test(drop-off height4m, once per direction, totally 3 times) |
dB | ΔIL≤0.3 |
Environmental performance requirements
| Category | Specification | |||
| Condition | lLl Variation | RL Variation | Appearance | |
| High TEMP | 110,200H | ≤0.3 | ≤5 | No mechanical damage, like d eformation, cr acking and unti ght |
| Low TEMP | -40,200H | ≤0.3 | ≤5 | |
| TEMP Cycling | -40~85,3.5H/Cle, 10oc |
≤0.3 | ≤5 | |
| HAST | 110,90%RH,20OH | ≤0.3 | ≤5 | |
| lmmersion | 25,200H | ≤0.3 | ≤5 | |
| Salt Mist | 5% Nacl,6.5<PH< 7.5,35,200H |
≤0.3 | ≤5 | |
Mechanical Performance Requirements
| Category | Specification | |||
| Condition | IL Variation |
RL Variation |
Appearance | |
| lmpact | Height: 4m; 1 drop each axis; 3 cycles |
<0.3 | ≤5 | No mechanica l damage, like deformation, cracking and u ntight |
| Vibration | Frequency: 10 ~50Hz; Sweep:45times / min ; amplitude:0.75mm; Duration:30min each axial |
<0.3 | ≤5 | |
| Torsional | Pull:15N;The distance between Loading location and fast connector: L = 22-28cm; Rate:10times / min. Times: 200 |
<0.3 | ≤5 | |
| Tensile | Pull : 50N; The distance between Loading locat ion and fast connector:L= 22-28cm; Duration: 1min. |
<0.3 | ≤5 | |
){kind=link}