Wholesale Sc APC Fiber Optic Fast Connector FTTH Fiber Optical Quick Connector

Product Description

Product Description

 Wholesale SC APC Fiber Optic Fast Connector Ftth Fiber Optical Quick Connector

Description

The fast connectors or field assembly optical connector are pre-polished from factory with V groove
mechanical splicing principal to be terminated without epoxy. It operates simply without any additional
practices or adhesives for field installation.
We provide LC, SC, FC singlemode, multimode fiber optic fast connector which is widely used in optical
wiring, CCTV, FTTH projects.

 

Features:

♦ Field installable in short time
♦ Factory pre-installed fiber stub
♦ No epoxy and polish required and without special tools to be used
♦ Eliminates cable excess length and pigtail splice storage
♦ Reliable and superior optical performance
♦ UPC or APC endface polish, singlemode or multimode for option

 

Application

♦ FTTH access network.
♦ Telecommunication Networks
♦ CATV Networks .
♦ Local Area Networks
♦ Optical repair or replacement requirement
♦ Maintenance or emergency restoration of fiber networks

 

Optical Characteristics

Category	Specification
Applicable for	Drop cable, Indoor cable
ptical fiber diameter and fiber	125um(G657A1&G657A2&G657B)
Tight buffer Diameter	250um
Fiber mode	Single mode or Multi mode
peration time	Sec	About 50(no fiber cut)
Insertion Loss	dB	≤0.3(max 0.5)
lnsertion Loss Typical value	dB	0.3
Return Loss	dB	≥45
Fastening strength of naked fiber	N	≥5
Tensile strength	N	≥50
Reusable	Time	≥10 times
perating Temperature		-40~+85
on-line tensile strength(2ON)	dB	ΔIL≤0.3
Mechanical durability(500 times)	dB	ΔIL≤0.3
Drop-off test(drop-off height4m, once per direction, totally 3 times)	dB	ΔIL≤0.3

Environmental performance requirements

Category	Specification
	Condition	lLl Variation	RL Variation	Appearance
High TEMP	110,200H	≤0.3	≤5	No mechanical damage, like d eformation, cr acking and unti ght
Low TEMP	-40,200H	≤0.3	≤5
TEMP Cycling	-40~85,3.5H/Cle, 10oc	≤0.3	≤5
HAST	110,90%RH,20OH	≤0.3	≤5
lmmersion	25,200H	≤0.3	≤5
Salt Mist	5% Nacl,6.5<PH< 7.5,35,200H	≤0.3	≤5

 

Mechanical Performance Requirements

Category	Specification
	Condition	IL Variation	RL Variation	Appearance
lmpact	Height: 4m; 1 drop each axis; 3 cycles	<0.3	≤5	No mechanica l damage, like deformation, cracking and u ntight
Vibration	Frequency: 10 ~50Hz; Sweep:45times / min ; amplitude:0.75mm; Duration:30min each axial	<0.3	≤5
Torsional	Pull:15N;The distance between Loading location and fast connector: L = 22-28cm; Rate:10times / min. Times: 200	<0.3	≤5
Tensile	Pull : 50N; The distance between Loading locat ion and fast connector:L= 22-28cm; Duration: 1min.	<0.3	≤5

 

Our Services

FAQ