Customization: | Available |
---|---|
Transmission Medium: | Single-Mode |
Structure: | SC |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Click here for more information
Description
The fast connectors or field assembly optical connector are pre-polished from factory with V groove
mechanical splicing principal to be terminated without epoxy. It operates simply without any additional
practices or adhesives for field installation.
We provide LC, SC, FC singlemode, multimode fiber optic fast connector which is widely used in optical
wiring, CCTV, FTTH projects.
Features:
Field installable in short time
Factory pre-installed fiber stub
No epoxy and polish required and without special tools to be used
Eliminates cable excess length and pigtail splice storage
Reliable and superior optical performance
UPC or APC endface polish, singlemode or multimode for option
Application
FTTH access network.
Telecommunication Networks
CATV Networks .
Local Area Networks
Optical repair or replacement requirement
Maintenance or emergency restoration of fiber networks
Optical Characteristics
Category | Specification | |
Applicable for | Drop cable, Indoor cable | |
ptical fiber diameter and fiber | 125um(G657A1&G657A2&G657B) | |
Tight buffer Diameter | 250um | |
Fiber mode | Single mode or Multi mode | |
peration time | Sec | About 50(no fiber cut) |
Insertion Loss | dB | ≤0.3(max 0.5) |
lnsertion Loss Typical value | dB | 0.3 |
Return Loss | dB | ≥45 |
Fastening strength of naked fiber | N | ≥5 |
Tensile strength | N | ≥50 |
Reusable | Time | ≥10 times |
perating Temperature | -40~+85 | |
on-line tensile strength(2ON) | dB | ΔIL≤0.3 |
Mechanical durability(500 times) | dB | ΔIL≤0.3 |
Drop-off test(drop-off height4m, once per direction, totally 3 times) |
dB | ΔIL≤0.3 |
Environmental performance requirements
Category | Specification | |||
Condition | lLl Variation | RL Variation | Appearance | |
High TEMP | 110,200H | ≤0.3 | ≤5 | No mechanical damage, like d eformation, cr acking and unti ght |
Low TEMP | -40,200H | ≤0.3 | ≤5 | |
TEMP Cycling | -40~85,3.5H/Cle, 10oc |
≤0.3 | ≤5 | |
HAST | 110,90%RH,20OH | ≤0.3 | ≤5 | |
lmmersion | 25,200H | ≤0.3 | ≤5 | |
Salt Mist | 5% Nacl,6.5<PH< 7.5,35,200H |
≤0.3 | ≤5 |
Mechanical Performance Requirements
Category | Specification | |||
Condition | IL Variation |
RL Variation |
Appearance | |
lmpact | Height: 4m; 1 drop each axis; 3 cycles |
<0.3 | ≤5 | No mechanica l damage, like deformation, cracking and u ntight |
Vibration | Frequency: 10 ~50Hz; Sweep:45times / min ; amplitude:0.75mm; Duration:30min each axial |
<0.3 | ≤5 | |
Torsional | Pull:15N;The distance between Loading location and fast connector: L = 22-28cm; Rate:10times / min. Times: 200 |
<0.3 | ≤5 | |
Tensile | Pull : 50N; The distance between Loading locat ion and fast connector:L= 22-28cm; Duration: 1min. |
<0.3 | ≤5 |